New to Mini Splits? Too many options to learn about? We got you covered!
Frequently Asked Questions
Install Video!
Follow this video until 17min. DO NOT CUT THE COPPER LINES as he does after 17min.
This video and our notes below will ensure you have the perfect install, with no issues!
Click for Install Video!
Notes about the video/Install:
-Drill your large hold at an angle to allow proper drainage, and make sure drain line is at bottom of bundle. 2 1/4in hole is perfect
-MAKE SURE to bend copper lines with 2 hands, slowly like he does;
-No vucuum pump is needed but highly recommend for greatest life of the unit;
-If no drilling template is included with your kit(most don't have), simply lay your bracket against wall where you want it, mark your holes with pen/marker/pencil.
Measure your large hole(for lineset+drain bundle) by laying the indoor unit on it's face, from bracket center to lineset bundle area. (usally Around
-You don't need the torque tools in the video, simply use crescent wrenches on each side and hand tight, check leaks with soap and water spray. no need for fancy spray.